Select Net Wrap Material

In order to achieve optimum performance, we recommend the use of high-quality net wrap. Use only John Deere approved net wrap material. Approved material is identified by a green strip near each end of the roll. (See your John Deere dealer.)

469 and 469S:

• CoverEdge wrap is available in roll lengths of 3688 m (12,100 ft.)
• Edge to Edge wrap is available in roll lengths of 4023 m (13,200 ft.)
• Alternatively, lighter weight rolls are available with CoverEdge 2999 m (9,840 ft.)
• B-Wrap material is available in a roll length containing 45 segments, each segment containing approximately 3 wraps of CoverEdge net and 1 wrap of Tama SCM™ breathable material.

569 and 569S:

• CoverEdge wrap is available in roll lengths of 2743 m (9,000 ft.)
• Edge to Edge wrap is available in roll lengths of 2956 m (9,700 ft.)
• Alternatively, lighter weight roll lengths are available with CoverEdge 2133 m (7,000 ft.)
• B-Wrap material is available in a roll length containing 35 segments, each segment containing approximately 3 wraps of CoverEdge net and 1 wrap of Tama SCM™ breathable material.

If using Edge to Edge net wrap material, it requires spacer plugs in end of roll and adjustments made to the net wrap attachment. (See ADJUST NET WRAP STRETCH in Service—Net Wrap section.)

Approximate Width of Net Wrap Rolls
	469 or 469S	569 or 569S
Edge to Edge net width	122 cm (48 in.)	163 cm (64 in.)
CoverEdge net width	129 cm (51 in.)	170 cm (67 in.)
B-Wrap net width	129 cm (51 in.)	170 cm (67 in.)