Tractor Compatibility

IMPORTANT: See tractor operator's manual for proper ballast.

469, 469 Silage Special, 569, and 569 Silage Special Baler Tractor Compatibility (1 of 2)
	Tractor Requirements
Model No.	Recommended PTO Horsepower	Implement Weight (goes into tractor ballast calculation)	7-Pin Connector Required	Number of SCV Pairs	Hydraulic Minimum Flow Rate from SCV
469	48 kW (65 hp.) minimum	2764 kg (6094 lb.)	Yes	One (Two if equipped with hydraulic pickup lift)	22.7—24.6 L/min. (6—6.5 gpm)
469 Silage Special	48 kW (65 hp.) minimum	2764 kg (6094 lb.)	Yes	One (Two if equipped with hydraulic pickup lift)	22.7—24.6 L/min. (6—6.5 gpm)
569	56 kW (75 hp.) minimum	3362 kg (7412 lb.)	Yes	One (Two if equipped with hydraulic pickup lift)	22.7—24.6 L/min. (6—6.5 gpm)
569 Silage Special	56 kW (75 hp.) minimum	3362 kg (7412 lb.)	Yes	One (Two if equipped with hydraulic pickup lift)	22.7—24.6 L/min. (6—6.5 gpm)

469, 469 Silage Special, 569, and 569 Silage Special Baler Tractor Compatibility (2 of 2)
		Tractor Requirements
Model No.	PTO Speed	Road Speed Maximum Limit	Drawbar Vertical Capacity	Drawbar Size	Electrical System Voltage	Electrical System Amps	Electrical System Grounding	Tractor Cab Required
469	540 or 1000 available	32 km/h (20 mph)	658 kg (1452 lb.)	Accept up to 51 mm (2 in.) thick drawbar.	12 VDC	20	Negative	No
469 Silage Special	540 or 1000 available	32 km/h (20 mph)	658 kg (1452 lb.)	Accept up to 51 mm (2 in.) thick drawbar.	12 VDC	20	Negative	No
569	540 or 1000 available	32 km/h (20 mph)	714 kg (1573 lb.)	Accept up to 51 mm (2 in.) thick drawbar.	12 VDC	20	Negative	No
569 Silage Special	540 or 1000 available	32 km/h (20 mph)	714 kg (1573 lb.)	Accept up to 51 mm (2 in.) thick drawbar.	12 VDC	20	Negative	No