Install BaleTrak™ Pro Monitor-Controller In SOUND-GARD™ Cab

  1. E21705
    E21705-UN-15SEP88

    A - Cap Screws, 5/16 x 1-3/4 in.

    B - Bracket

    Assemble monitor-controller bracket (B) to base.


  2. Attach base to window ledge. Fasten with three 5/16 x 1-3/4 in. cap screws (A).

  3. E52435
    E52435-UN-16JUN03

    A - Monitor-Controller

    Put monitor-controller (A) pivot bracket on top of mounting bracket. Fasten with M6 x 16 cap screw.


  4. Route harness along right-hand side of cab, away from operating levers, and toward rear of cab.

  5. E21708
    E21708-UN-06JUL89

    A - Convenience Outlet

    Connect harness power plug to convenience outlet (A).


  6. Route harness through grommet in back of cab, or drill a 44 mm (1-3/4 in.) diameter hole in rear wall if necessary.

PP98408,0000FEB-19-20130211