Adjust Compressor Rod Channel (MegaTooth™ Pickup)

E40719
E40719-UN-09AUG96

A - Nuts

B - Compressor Rod Channel

C - Dimension

D - Compressor Tube

Compressor rod channel reduces compressor rod breakage and helps keep rods from being caught and held by starter roll.

Adjust channel whenever compressor rods are replaced or if channel has been removed.

  1. Loosen nuts (A) on compressor rod channel (B).

  2. Adjust channel (B) until dimension (C) is within specifications between compressor tube (D) and channel (B).

    ItemMeasurementSpecification
    Compressor Tube-to-ChannelDistance50 mm (2 in.)

  3. NOTE: Do not overtighten nuts. Overtightening can cause channel to collapse and not retain compressor rods.

    Tighten nuts (A).

PP98408,00010B0-19-20130211