Service Quick Reference Chart

Use these charts in conjunction with the detailed procedures on the following pages to record service procedures and confirm they are performed in a timely manner.

Copy these pages to continue the record.

Hour Meter Reading

                                     

Date

                                     

Serviced By (initial)

                                     
 
 

10 HOURS OR DAILY

Recording Daily or 10 Hour Maintenance, because of repetitive nature, is at owner/operator discretion

Clean A/C Condenser,Air,Hydraulic Coolers,Radiator

                                      

Check Engine Oil Level

                                      

Check Engine Coolant Level

                                      

Check Engine Belts

                                      

Check Hydraulic Oil Level

                                      

Check Hydraulic Hoses and Lines

                                      

Check Tire Inflation

                                      

Check Fuel Tank Level

                                      

Check Fuel Water Trap

                                      

ANNUALLY

Recommended at Beginning of Season

Change Fuel Tank Vent Filter

                                      

Check A/C Blower

                                      

Check Antifreeze Concentration

                                      

Check Battery Charge

                                      

Check Battery Fluid Level

                                      

Check Steering Linkage

                                      

EVERY 50 HOURS

Clean Cab Fresh Air Intake Filter

                                      

Check Gear Box Oil Level (W150)

                                      

Grease Caster Pivots

                                      

Grease Forked Caster Spindle Bearing

                                      

Grease Top Lift Link Pivots

                                      

Grease Walking Beam Center Pivot

                                      

EVERY 100 HOURS OR ANNUALLLY

Clean Cab Air Return Filter

                                      

EVERY 250 HOURS OR ANNUALLY

Change Engine Oil and Filter

                                      

Change Engine Primary Filter

                                      

Grease Formed Caster Wheel Hub Bearing

                                      

Check Drive Wheel Lubricant

                                      

Check Wheel Nut Torque

                                      

Note: Operating conditions vary. Under extreme conditions, inspect and service components more frequently.

Some service and maintenance safety precautions

  • Never service the windrower while it is running
  • Allow components to cool to the touch if the windrower has been running and is up to operating temperature
  • Allow enough space for the service procedure and tools
  • Place the windrower on a firm, level surface
  • Confirm that the windrower is in N-Detent position with the steering wheel centered before servicing
  • Always remove the key from the ignition before servicing
  • Place a mark out tag or sign on the steering wheel to warn others that the windrower is being serviced
  • Block the wheels to keep windrower from moving during drivetrain, wheel and tire procedures

These precautions are not all inclusive but intended as a reminder. Contact your dealer if you have any questions concerning service or maintenance of your machine.

Hour Meter Reading

                                     

Date

                                     

Serviced By (initial)

                                     
 
 

EVERY 500 HOURS

Change Fuel Filters

                                      

Change Gearbox Lubricant

                                      

Change Hydraulic Oil Filters

                                      

Check Safety Systems

(may be checked annually)

                                      

1000 HOURS

Change Drive Wheel Lubricant

                                      

EVERY 1500 HOURS or BI-ANNUALLY

Change Hydraulic Oil

                                      

EVERY 2000 HOURS or BI-ANNUALLLY

Change Engine Coolant

                                      

Check General Machine Condition

                                      

EVERY 5000 HOURS or BI-ANNUALLY

Check Engine Valves

                                      

Note: Operating conditions vary. Under extreme conditions, inspect and service components more frequently.

OUO6043,00001FB-19-20130129