Header Drive Switch

E61021-UN-02JUL12

W110 Header Drive Switch

E61022-UN-13JUN12

W150 Header Drive Switch

A - Header Drive Switch

B - Header Drive Reverse Switch (W150 only)

CAUTION: Always move throttle lever back to IDLE before engaging header drive.

Do NOT engage header with engine at full RPM.

To ENGAGE - Push center and pull up.

To DISENGAGE - Push down.

NOTE: Operator must be in the seat to engage header drive. Platform drive will disengage if operator leaves the seat.

Platform drive will disengage if engine is started with platform switch engaged. Switch will then need to be put into OFF, and back to engage to start platform.

W150 Header Reverse Option

Header Reverse Button Switch (B)

To ENGAGE - Push / Hold / Engage Header

To DISENGAGE - Release Button Switch

NOTE: The optional hydraulic reversing kit must be installed on draper headers with a conditioner and on auger headers.