Every 2000 Hours or Bi-Annually1

E63288
E63288-UN-11JUL12

NOTE:

Item

Item Description

Points

Lubrication / Maintenance Description

Approved Material

9

Engine Valve Clearance

1

Check and Adjust (See your John Deere Dealer)

  

14

Engine Coolant2

1

Pressure Test, Flush Cooling System and Replace Coolant (See Fuel, Coolant and Lubricants Section)

  

17

Hydrostat Oil

1

Replace Oil and Clean Fill Cap and Strainer

J20C HY-GARD®

Note: Operating conditions vary. Under extreme conditions, inspect and service components more frequently.

1 Whichever comes first.
2 Initial change interval is 6 years or 6000 hours provided cooling system is topped off using only John Deere Cool Guard II premix and coolant is tested at recommended intervals. After initial service, next scheduled interval (2 years or 2000 hours) can be extended up to 6 years or 6000 hours depending on coolant used and if coolant is tested at recommended intervals. See Operators manual.

RC48509,0000563-19-20120814