Gearbox Oil Change

E63279
E63279-UN-23APR12

E63280
E63280-UN-18JUN12

A - Fill Plug

B - Drain Plug

C - Breather/Fill Cap

Change the gearbox oil after the first 500 hours of operation on the W150 windrower.

To change gearbox oil:

  1. Park the windrower on firm, level ground.

  2. Shut the engine off and remove the key.

  3. Remove plug (A). The oil should be visible through the hole or slightly running out.

  4. Remove drain plug (C) and allow oil to drain.

  5. Install drain plug (C) and fill oil through the breather cap (B).

  6. Once oil is up to or starting to run out of the check plug (A) install the plug.

  7. Operate the engine at low idle and check for leaks at the check and drain plug.

RC48509,000056A-19-20120910