Prevent Damage to Electrical Systems

CAUTION:

TS204-UN-23AUG88

Never check battery charge by placing a metal object across the posts. Use a voltmeter or hydrometer.

Reduce the possibility of an electrical spark when disconnecting battery by:

• Turn the battery master disconnect off.
• Ensuring key switch and all accessories are turned off.
• Disconnecting negative (—) battery cable (A) first and connecting it last.

NOTE: Always keep cover (C) on battery when operating the windrower.

To prevent damage to electrical system components, always observe these precautions:

Never disconnect the battery with the key switch on or the engine running.

Never connect jumper cables with the key switch on.

Disconnect battery when charging. (See CHARGING BATTERY in this section.)

The windrower should be jump started by 12 volts only.

Always charge the battery with a charger for 12 volts.

Never connect or disconnect wiring harness connectors with the key switch on.

Route negative (—) cable (A) away from positive (+) cable (B) when connecting battery to system.

Do not apply power or ground to any component as a test, unless instructed.