W150 Options - Attachments

Header Drive Reverser

Allows the conditioner, auger and reel to reverse on the auger header. Allows the conditioner and knife to reverse on draper header.

Double Windrow Attachment

Allows auger header windrower to lay a double windrow. The kit includes a draper deck, linkage assembly, hydraulics.

Self-Aligning Center-Link

Allows the center-link cylinder to be hydraulically positioned and connected to the header without leaving the operator’s station.

External Booster Spring

Available for headers over 2 724 kg (6 000 lbs.) to increase the float capacity.

Internal Booster Spring

Internal spring for lift linkage to improve float capacity.

Light Header Flotation

Available for headers that do not require as much spring tension for float.

Windshield Shades

Retractable sun shades for front and rear windows.

Pressure Sensor

Monitors hydraulic pressure and warns of overload conditions.

Weight Box

The weight box allows engine-forward transport in high range when the header is not attached.

Towing Harness

Towing harness is used together with the weight box if towing a D Series draper header equipped with slow speed transport option.

Warning Beacons

Roof mounted rotating warning beacons for installation into pre-wired cab. Standard equipment for export shipment.

Lighting and Marking for Cab-Forward Road Travel

Allows windrower to travel in the cab-forward mode and comply with lighting regulations.

Fan Air Baffle

Provides a baffle to reduce windrow disturbance by air exiting the engine cooling fan.

HID Auxilliary Lighting

Provides additional field lighting. Kit includes two cab-mounted high intensity discharge lamps and installation instructions.