W110 Options / Attachments

Booster Spring Kit

Available for headers over 2 724 kg (6 000 lbs.)

Internal Booster Spring Kit

Internal spring for right side lift linkage to improve float capacity. Standard equipment on left side.

Light Header Flotation Kit

Available for headers that do not require as much spring tension for float.

Hydraulic Center-Link

The hydraulic center-link allows the Operator to adjust the header angle from the cab.

Fan Air Baffle Kit

Provides a baffle to reduce windrow disturbance by air exiting the engine cooling fan.

Training Seat

A wall mounted fold-up training seat with seat belt to assist in new operator training.

Knife Speed, Reel Speed Index and Tilt Sensor Module

Allows the electronic monitoring of header knife speed, reel speed and header angle. Also enables the indexing of reel speed to ground speed.

Anti-Shimmy Kit for Casters

Prevents caster wheel shimmy when traveling at road speed.

Warning Beacons

Two roof mounted rotating warning beacons are available for installation into pre-wired cab. Standard equipment for export machines.

Transport Drawbar

Allows W110 windrower to tow headers equipped with a Slow Speed Transport system.

Weight Box

The weight box allows transporting the header behind the windrower by providing additional weight on drive wheels.

Windshield Shades

Retractable sun shades for front and rear windows.

HID Auxilliary Lighting

Two cab mounted, high intensity discharge lamps provide additional field lighting.