L1533 Large Square Baler

Specifications and design are subject to change without notice.

Baler Dimension and Weight
Width..............	2.81 m (9.2 ft)
Overall Length Bale Chute Folded Up..............	8.0 m (26.2 ft)
Overall Length Bale Chute Folded Up With Weighing System..............	8.2 m (26.9 ft)
Overall Length Bale Chute Folded Up With Prechopper..............	9.58 m (31.5 ft)
Overall Length Bale Chute Extended..............	8.85 m (29 ft)
Overall Length Bale Chute Extended With Weighing System..............	9.25 m (30.3 ft)
Overall Length Bale Chute Extended With Prechopper..............	10.4 m (34.2 ft)
Overall Height..............	3.36 m (11 ft)
Weight (Empty)..............	8800—9500 kg (18 522—20 947 lb)
Weight With Prechopper (Empty)..............	9600—10 100 kg (21 120—22 220 lb)

Bale Size
Height x Width..............	80 x 90 cm (31.5 x 35.4 in)1
Length (Adjustable)..............	60—300 cm (23.6—118.1 in)

Pickup
Working Width..............	2.3 m (7.5 ft)
Number of Tooth Bars..............	5
Number of Teeth..............	160
Lift Control..............	Hydraulic
Flotation..............	Spring tension, adjustable
Reel Diameter..............	330 mm (13 in)
Gauge Wheel Type..............	Fixed or Pivoting

Plungerhead
Speed..............	46 strokes per minute
Stroke Length..............	695 mm (27.4 in)

Feeding System
Primary Feeding..............	Inline auger / Rotor with feeding tines
Secondary Precompression Chamber Feeding..............	Intermittent feeder fork with 5 tines

Tying System
Type..............	Double-tie knotter
Number of Knotters..............	4
Knots Per Bale..............	8
Spacing..............	180 mm (7.1 in)
Twine Capacity..............	30 balls
Twine Type..............	John Deere XtraTwine™, type 150, type 130, or type HD
Lubrication..............	Central lubrication system

Bale Chamber Tensioning
Type..............	3 pressure controlled tension panels
Density Control..............	Hydraulic pressure adjustable from the tractor

Drivetrain Protection
Main Drivetrain..............	Flywheel shear bolt Friction with the automatic overload clutch (optional)
Pickup..............	Automatic radial cam clutch
Rotor..............	Automatic radial cam clutch
Feeder Fork..............	Automatic radial cam clutch
Needles..............	Shear bolts

Axle
Single Axle..............	Hydraulic or pneumatic brakes
Tandem Axle..............	Hydraulic or pneumatic brakes Following, lockable rear axle
Brakes..............	Shoe on drum, hydraulic or pneumatically activated brake system connected to the tractor brake system
Parking Brakes..............	Cable activated with crank
Hydraulic Emergency Brakes (if equipped)..............	Rope pulls the emergency brake activation valve in case baler-to-tractor connection is interrupted
Pneumatic Emergency Brakes (if equipped)..............	Brakes are applied when air hose connection is broken Emergency brakes are also applied when air pressure falls below a predetermined pressure in the air storage tank

Tire Size
Single Axle..............	600/55-22.5 Flotation + 710/40 R22.5 Flotation Pro
Tandem Axle..............	550/45-22.5 Flotation + 560/45-R22.5 Flotation Pro 620/50-22.5 Flotation Pro

Monitor
Baler Control Monitor..............	GreenStar™ 2 1800 Display GreenStar™ 2 2600 Display GreenStar™ 3 2630 Display Generation 3 CommandCenter™ Display Generation 4 CommandCenter™ Display

Oil Capacities
Main Gear Case..............	26.3 L (7 gal)
Lower Knotter Gear Case..............	3.3 L (0.9 gal)
Upper Knotter Gear Case..............	0.8 kg (1.8 lb)
Feeder Fork Gear Case..............	4.0 L (1.06 gal)
Hydraulic Reservoir..............	50.0 L (13.25 gal)
Rotor Cam Clutch..............	280 mL (9.5 oz)

Tractor Requirements
PTO Minimum Power..............	77 kW (105 hp) 88 kW (120 hp) with Precutter 127 kW (170 hp) with Prechopper
PTO Speed..............	1000 rpm
1 Double Acting Control Valve Outlet..............	Bale chute / Last bale eject
1 Single Acting Control Valve Outlet..............	Jackstand / Pickup lift
1 Single Acting Control Valve Outlet..............	Steered tandem axle (if equipped)
Hydraulic Brakes..............	1 brake connection—ISO 5676 (if equipped)
Pneumatic Brakes..............	Duel circuit braking system (if equipped)
Electric Supply..............	DEUTSCH HD30 male 9-pin connector
Electric Supply Road Lighting..............	7-pin connector