Adjust Knotter Shaft Brake

Check the spring tension regularly. Replace the brake linings as soon as they are worn. Never grease the brake rotor.

ZX1050759-UN-06AUG12

A - Cap Screw

B - Spring

C - Nut

X - 45 mm (1.75 in.)

Adjust using cap screws (A) keeping springs (B) at equal lengths. (X) = 45 mm (1.75 in.)

1. Loosen or tighten the nut (C) to adjust spring tension.
2. To ensure that linings are parallel, use set bolts.