Adjust Tractor Selective Control Valves

CC000833-UN-05APR95

Tractor must have:

• One single acting control valve for pickup - jackstand lift circuit.
• One double acting control valve for bale chute - last bale ejector circuit.
• One single acting control valve for steerable tandem axle circuit.

Adjust tractor SCV to float position to activate pickup float or damage to pickup may occur.

Adjust tractor SCV for pickup float, as follows:

For 6000/7000 Series John Deere tractors; Adjust SCV lever for continuous detent. Lever must be manually returned to neutral. Move SCV lever lockout to full left position.

For 8000 Series John Deere tractors, set detent time to 0.

Set tractor selective control valves at maximum flow. See tractor Operator's Manual for adjustments.