Select Tractor PTO Speed

CC007602-UN-02OCT96

Under no circumstances, should a baler equipped for 1000 rpm PTO drive be operated with a tractor at 540 or 750 rpm PTO speed. Always run tractor at rated PTO speed. Overspeed damages baler.

Refer to tag on front of baler to select tractor PTO speed.

Baler is shipped with a telescoping driveline for a 1-3/8 in (6 or 21 splines) or 1-3/4 in (20 splines). diameter PTO shaft.

Always operate baler with tractor PTO speed at 1000 rpm.

Refer to tractor Operator's Manual to install appropriate PTO shaft and set PTO speed.

Tractor must have a minimum PTO output of:

• 77 kW (105 hp) on L1533 baler
• 88 kW (120 hp) on L1533 baler with precutter
• 103 kW (139 hp) on L1534 baler
• 121 kW (163 hp) on L1534 baler with precutter