Activate Cinch Wrap Program

Cinch Wrap is a feature that can decrease loose twine and improve twine spacing on the left-hand side of the bale. It places a wrap of twine approximately 25 cm (10 in) away from the left-hand end wrap location before applying the set number of end wraps.

To activate or deactivate the cinch wrap program:

1. Turn tractor key to ON position. Do not start tractor engine. Monitor receives power through tractor key—controlled circuit.

2. 
   E84866-UN-05OCT17

   Select the Baler Main Page softkey.

---




3. 
   E84878-UN-05OCT17

   Select the Wrap Setup softkey on the baler application main page. Ensure that the twine system icon is shown on the wrap setup page.

---




4. 
   E66979-UN-09AUG12

   Cinch Wrap Check Box

   Select the cinch wrap check box to activate or deactivate the cinch wrap program. A check mark in the box indicates that the program is ON.

---