Tire Installation and Wheel Nut Torque

Install wheels with the valve stems toward the outside. Incorrect assembly can cause wheel nuts to loosen.

Exceeding recommended tire pressure can damage baler frame.

Wheel nuts must be tightened to specifications.

Whenever a wheel has been removed and installed, check wheel nut torque after 1 hour of operation and repeat until nuts maintain specified torque.

1. 
   E62049-UN-30MAR12

   21.5L x 16.1 Tire Shown

   Install the wheel with the valve stem toward the outside. Fasten with eight 5/8 in nuts.

---




2. Tighten wheel nuts to specifications.

   Wheel Nuts	Torque	237 N·m (175 lb·ft)

3. Adjust tire inflation pressure.

   Tires	kPa (bar) (psi)
   21.5L x 16.1, 10 PR	103 (1.0) (15)

4. Repeat procedure on the opposite side.