Select Net Wrap Material

In order to achieve optimum performance, use only John Deere approved high-quality net wrap material. Approved material is identified by a green strip near each end of the roll. (See your John Deere dealer.)

460M:

• CoverEdge™ wrap is available in roll lengths of 3688 m (12 100 ft)
• Alternatively, CoverEdge™ wrap is available in lighter weight roll lengths of 2999 m (9840 ft)
• Edge to Edge wrap is available in roll lengths of 4023 m (13 200 ft)
• B-Wrap material is available in a roll length containing 45 segments. Each segment contains approximately three wraps of CoverEdge™ net and one wrap of Tama SCM™ breathable material.

560M:

• CoverEdge™ wrap is available in roll lengths of 2743 m (9000 ft)
• Alternatively, CoverEdge™ wrap is available in lighter weight roll lengths of 2133 m (7000 ft)
• Edge to Edge wrap is available in roll lengths of 2956 m (9700 ft)
• B-Wrap material is available in a roll length containing 35 segments. Each segment contains approximately three wraps of CoverEdge™ net and one wrap of Tama SCM™ breathable material.

If using Edge to Edge net wrap material, it requires spacer plugs in end of roll and adjustments made to the net wrap attachment. (See ADJUST NET WRAP STRETCH in Service—Net Wrap section.)

Approximate Width of Net Wrap Rolls
	460M	560M
Edge to Edge net wrap	122 cm (48 in)	163 cm (64 in)
CoverEdge™ net wrap	129 cm (51 in)	170 cm (67 in)
B-Wrap net wrap	129 cm (51 in)	170 cm (67 in)