After First 50 Hours

Gear Case (MegaWide™ Plus Pickup)

Drain and refill the gear case in the MegaWide™ Plus pickup after the first 50 hours of operation and once each season thereafter.

1. 
   E83425-UN-08JUN17

   Gear Case Drain Plug (MegaWide™ Plus Pickup)

   
   E83427-UN-08JUN17

   Gear Case Dipstick (MegaWide™ Plus Pickup)

   A - Drain Plug

   B - Dipstick

   Driveline removed for illustration purposes.

   Remove the drain plug (A) and drain oil into a suitable container. Dispose of oil properly.

---




2. Install the drain plug.

3. Do not over-fill the gear case. Over-filling results in over-heating and oil leakage.

   Remove the dipstick (B) and refill the gear case using SAE 85-140 API GL-5 gear lubricant.

   Gear Case	Capacity	1.2 L (1.25 qt)

4. Install the dipstick and check the lubricant level. Lubricant must fall between the grooves on the dipstick.

5. When the lubricant is at the proper level, tighten the dipstick to specification.

   Dipstick	Torque	29 N·m (21 lb·ft)

Gear Case (MegaWide™ HC2 Pickup)

Drain and refill the gear case after the first 50 hours of operation and once each season thereafter.

1. 
   E83426-UN-08JUN17

   Gear Case (MegaWide™ HC2 Pickup)

   A - Drain Plug

   B - Check Plug

   C - Fill Plug

   Remove the drain plug (A), check plug (B), and fill plug (C) and drain oil from the gear case.

---




2. Install the drain plug and clean up any spilled oil.

3. Do not over fill the gear case. Overfilling results in overheating and oil leakage.

   Refill the gear case using SAE 85-140 API GL-5 gear lubricant until oil reaches the check plug port.

   Gear Case	Capacity	1.2 L (1.25 qt)

4. Install and tighten the check plug.

5. Install and tighten the fill plug.