CoverEdge™ Surface Wrap Unit

E83991-UN-01AUG17

Wrap time is reduced to only two turns of the bale (approximately six seconds or less), reducing the loss of leaves and short material. Complete wrap and ejection time for full-size bales is approximately 20 seconds or less.

Twine is not required when using surface wrap. The net material clings to itself and holds the bale.

The operator can select twine or surface wrap application conveniently from the tractor seat using the BaleTrak™ monitor-controller.

The rolls of surface wrap are easily loaded into the unit at the rear of the baler.