Install BaleTrak™ Monitor-Controller in SOUND-GARD™ Cab

  1. E21705
    E21705-UN-15SEP88

    A - Cap Screws, 5/16 x 1-3/4 in (3 used)

    B - Bracket

    Assemble the monitor-controller mounting bracket (B).


  2. Attach the base of the bracket to the window ledge using cap screws (A).

  3. E52435
    E52435-UN-16JUN03

    BaleTrak™ Pro Monitor-Controller

    E84329
    E84329-UN-06SEP17

    BaleTrak™ Plus Monitor-Controller

    A - Monitor-Controller

    Attach the pivot bracket on the monitor-controller (A) to the mounting bracket using a M6 x 16 cap screw.


  4. Route the monitor-controller wiring harness along the right-hand side of the cab, away from operating levers, and toward the rear of the cab.

  5. E21708
    E21708-UN-06JUL89

    A - Convenience Outlet

    Connect the power plug on the wiring harness to the convenience outlet (A).


  6. Route the harness through a grommet in the rear of the cab, or drill a 44 mm (1-3/4 in) diameter hole in the rear wall if necessary.

DP99999,0000DBC-19-20170915