BaleTrak™ Pro and Plus Monitor-Controller Setup Values and Initial Settings

BALE DIAMETER
Readout Display Range..............	77—160 cm (30.5—63 in)
Diameter Adjustment Range..............	91—152 cm (36—60 in)
Diameter Initial Setting1..............	142 cm (56 in)
Near Full-Size Range..............	1—27 cm (0.5—10.0 in)
Near Full-Size Initial Setting1..............	11 cm (4.5 in)
Bale Shape Sensitivity Range..............	1 (slowest) — 5 (fastest)
Bale Shape Sensitivity Initial Setting1..............	3 (medium)

TWINE WRAP
Spacing Range..............	2—26 cm (1—10 in)
Spacing Initial Setting1..............	10 cm (4 in)
Number of End Wraps Range
Left-Hand End..............	0—5 Wraps
Right-hand End..............	0.5—5.0 Wraps
Number of End Wraps Initial Setting1..............	2 Wraps
Left-Hand, Right-Hand End Wrap Distance Range..............	8—26 cm (3—10 in)
End Wrap Distance Initial Setting (Right and Left-Hand)1..............	10 cm (4 in)
Re-extension Wrap Distance Range..............	OFF1, 20, 40, 60 cm (8, 16, 24 in)
Cinch Wrap Initial Setting (From Left-Hand End)..............	OFF1, 25 cm (10 in)
Dry Straw..............	OFF1, ON
Delay of Twine Eject..............	0—10 Seconds
Delay of Twine Eject, Initial Setting..............	0 Seconds

NET WRAP
Number of Wraps..............	1.5—10.0
Number of Wraps Initial Setting1..............	2
Time Delay Range (From Full-Size Bale Alert to Start of Net Wrap Cycle)..............	0—8 Seconds
Time Delay Initial Setting1..............	2 Seconds

VARIABLE CORE DIAMETER
Diameter Adjustment Range..............	81—142 cm (32—56 in)2
Diameter Initial Setting1..............	91 cm (36 in)