Adjust Starter Roll Scraper (If Equipped)

1. 

   
   TS268-UN-23AUG88

   Be careful when working around the starter roll scraper. The knife is sharp and can cause serious injury.

   To avoid pinching fingers, rotate the starter roll in direction shown.

   
   E51108-UN-17JAN02

   A - Cap Screws

   B - Scraper Bar

   C - Clearance

   D - Starter Roll

   Clear area of all debris between knife, scraper bar (B), and starter roll (D).

---




2. Loosen cap screws (A).

3. Clearance (C) must be within specifications.

   Scraper Bar-to-Starter Roll	Clearance	0.5—1.0 mm (0.020—0.040 in)

4. Tighten cap screws (A).

5. To check the clearance at all the bars, manually rotate the starter roll (D). Readjust if necessary.