Net Wrap, Slip Clutch Alert, and Variable Core Features (Turn On and Off)

The following features must be activated before operation. These features can also be turned off if desired.

Feature	Channel	ON	OFF
Net Operation (If Equipped)	203	1	0
PTO Sensor1	204	540 or 1000	0
Pickup Sensor1	205	310 (Non-Precutter) 170 (HC2 Precutter)	0
Variable Core Valve (If Equipped)	208	1	0

Turning Features On and Off

1. Turn tractor key to ON position. Do not start the tractor.
2. Press and hold both the COUNTER key and NUMBER OF WRAPS key while turning monitor-controller to ON.
3. Release both keys.
4. Press and hold COUNTER key and press the PLUS key until desired channel is shown in display.
5. Release COUNTER key.
6. To change the display to the desired value, press the PLUS or MINUS key .
7. Turn monitor-controller OFF.
8. Turn tractor key to OFF position, remove key.

Slip Clutch Alert

• Accessing channel 205 and changing value to 0 turns off slip alert feature. Shutting off the pickup sensor on channel 205, still allows automatic speed compensation during the net or twine application cycle.
• Entire system can be turned off by changing channel 204 to 0.