Adjust Starter Roll Scraper (If Equipped)

1. 

   
   TS268-UN-23AUG88

   Be careful when working around the starter roll scraper. The knife is sharp and can cause serious injury.

   Rotate starter roll in direction shown to avoid pinching fingers.

   
   E51108-UN-17JAN02

   A - Cap Screws

   B - Scraper Bar

   C - Clearance

   D - Starter Roll

   Clear area of all debris between knife and starter roll.

---




2. Loosen cap screws (A).

3. Clearance (C) must be within specifications.

   Scraper Bar-to-Starter Roll	Clearance	0.5—1.0 mm (0.020—0.039 in)

4. Tighten cap screws (A).

5. To check clearance at all bars, manually rotate the starter roll (D). Readjust if necessary.