Predelivery

After the baler has been completely set up, inspect it to be sure it is in good running condition before delivering it to the customer. The following checklist is a reminder of important points to inspect. Check off each item as it is found satisfactory after proper adjustment has been made.

□ Baler has been assembled correctly.

□ Check hydraulic hose and connections for oil leaks.

□ Check monitor. Make sure communication signal is received when monitor it turned on.

□ Hydraulic cylinders operate properly.

□ Lower pickup and cycle twine arms to check for proper function.

□ Gate opens and closes freely.

□ Belt tracking is satisfactory.

□ Machine lubricated and gear case level checked. (See Lubrication and Maintenance section.)

□ Drive chains have been adjusted correctly and lubricated.

□ Warning lights are operating correctly.

□ Check that shipping cover on SMV sign has been removed and sign is properly displayed.

□ All hardware tight.

□ Tire pressures checked.

□ Decals intact and legible.

□ Safety chain is attached.

□ Check operating functions of any optional equipment installed.

□ If equipped, make sure fire extinguisher is filled and pressurized.

(Date Set Up)_________________________

(Signature)___________________________