Operate Baler Safely
E32161-UN-12SEP88
To avoid injury or death by being pulled into the machine:
-
DO NOT attempt to feed crop or twine into baler or unplug feed
area WHILE BALER IS RUNNING. The baler feeds material faster than
you can release it.
-
Disengage PTO and shut off engine.
-
Stand clear of baler at all times when machine is operating.
E47598-UN-07JAN00
If baler plugs during twine arm cycle, it is recommended
that twine arms be manually positioned to release any “hold” they
may have on the crop plug. Turn off power to twine arms. This will
help to make the unplugging operation easier and prevent twine arms
from moving unexpectedly while your hands may be in the path of the
twine arms. Stay out of the path of twine arms at all times when power
to the arms is ON.
|
|
GW44282,00004F5-19-20150506
|
|