BaleTrak™ Pro Monitor-Controller System Introduction

E52435-UN-16JUN03

A - Monitor-Controller

The BaleTrak™ Pro system provides accurate and useful information to help the operator make the best bales possible.

In addition, the operator can adjust most control settings from the tractor seat without inconvenience or delays. By pushing a single button, twine arms can be extended or retracted, or the auto wrap cycle can be initiated.

The BaleTrak™ Pro system is factory preset, functional and ready to use. Operate the baler briefly with factory settings to become familiar with the settings before adjusting or resetting them. The system will remember the settings when power is shut off.

The system can be used to troubleshoot baler malfunctions and gives error code messages during malfunctions. Convenient channels are available to ensure correct baler switch and sensor adjustments.

The BaleTrak™ Pro system monitors and/or controls the following baling operations and conditions:

• Bale Diameter
• Automatic Twine Wrapping
• Bale Eject
• Bale Count
• Gate Closed
• Alarms
  • Gate Open
  • Oversize Bale
  • Low Tractor Voltage
• Error Codes of System Malfunctions