Removing Baler from Storage (Beginning of Season)

1. Check and fill gear case to the dipstick level. (See Lubrication and Maintenance section.)

2. Remove heavy oil from chains and lubricate with 30W or heavier oil.

3. Lubricate complete machine. (See Lubrication and Maintenance section.) This forces any collected moisture out of the bearings.

4. Check tires for correct air pressure.

5. Tighten all hardware.

6. Check belt splice pins for damage. Replace as necessary.

7. If equipped with the fire extinguisher, follow manufacturers recommendation for inspection and maintenance. Refill, pressurize, and test the fire extinguisher.

8. Review operator's manual and check adjustments.

9. Check function of oversize bale alarm. (See Checking Bale Size Switch in Prepare Baler for Twine section.)