Specifications

Model X125

Engine Model..............Briggs & Stratton 31
Displacement..............500 cc (30.5 cu in.)
Spark Plug-Gap..............0.76 mm (0.030 in.)
Spark Plug-Torque..............20 N•m (15 lb-ft)
Cylinders..............Single
Oil Filter..............Yes
Air Filter..............Cartridge
Transmission..............Hydrostatic
Transaxle Model..............Tuff Torq™ T40
Travel Speed - Forward..............0 - 8.9 km/h (0 - 5.5 mph)
Travel Speed - Reverse..............0 - 5.2 km/h (0 - 3.2 mph)

Model X145

Engine Model..............Briggs & Stratton 31
Displacement..............500 cc (30.5 cu in.)
Spark Plug-Gap..............0.76 mm (0.030 in.)
Spark Plug-Torque..............20 N•m (15 lb-ft)
Cylinders..............Single
Oil Filter..............Yes
Air Filter..............Cartridge
Transmission..............Hydrostatic
Transaxle Model..............Tuff Torq™ T40
Travel Speed - Forward..............0 - 8.9 km/h (0 - 5.5 mph)
Travel Speed - Reverse..............0 - 5.2 km/h (0 - 3.2 mph)

Model X165

Engine Model..............Briggs & Stratton 40
Displacement..............656 cc (40 cu in.)
Spark Plug-Gap..............0.76 mm (0.030 in.)
Spark Plug-Torque..............20 N•m (15 lb-ft)
Cylinders..............Twin
Oil Filter..............Yes
Air Filter..............Cartridge
Transmission..............Hydrostatic
Transaxle Model..............Tuff Torq™ HD K46
Travel Speed - Forward..............0 - 8.9 km/h (0 - 5.5 mph)
Travel Speed - Reverse..............0 - 5.2 km/h (0 - 3.2 mph)

Electrical System (All Models)

Charging System..............Regulated Circuit
Charging System..............Capacity 9 Amp
Battery Voltage..............12 Volts
Battery Type..............BCI Group U1

Capacities

Models X125

Crankcase, with Oil Filter..............1.4 L (1.5 qt)
Fuel Tank..............9.1 L (2.4 gal)

Models X145

Crankcase, with Oil Filter..............1.4 L (1.5 qt)

Fuel Tank..............9.1 L (2.4 gal)

Model X165

Crankcase, with Oil Filter..............1.9 L (2.0 qt)
Fuel Tank..............9.1 L (2.4 gal)

Fuel System (All Models)

Fuel Types (Recommended):..............Regular Grade 87 Octane Unleaded Fuel
..............Ethanol Blended Fuel (Up to 10%)
..............MTBE Reformulated Fuel (Up to 15%)

Recommended Lubricants (All Models)

Engine Oil:
..............TURF-GARD™
..............PLUS 4™
Grease:
..............John Deere Multi-Purpose SD Polyurea Grease
..............John Deere Multi-Purpose HD Lithium Complex Grease

(Specifications and design subject to change without notice)

Dimensions (All Models)

Height (X125)..............108 cm (42.5 in.)
Height (X145)..............113 cm (44.5 in.)
Height (X165)..............114 cm (45.0 in.)
Length (Overall) (X125)..............186 cm (73.25 in.)
Length (Overall) (X145)..............189 cm (74.25 in.)
Length (Overall) (X165)..............194 cm (76.5 in.)
Width (Mower Deck Chute Down) (X125, X145)..............138 cm (54.4 in.)
Width (Mower Deck Chute Down) (X165)..............152 cm (60 in.)
Weight (X125, X145)..............195 kg (428 lb)
Weight (X165)..............232 kg (511 lb)

Tires

Models X125

Size (Front)..............15 x 6.00 - 6
Size (Rear)..............20 x 8.0 - 8
Tire Pressure (Front)..............97 kPa (14 psi)
Tire Pressure (Rear)..............69 kPa (10 psi)

Models X145

Size (Front)..............15 x 6.00 - 6
Size (Rear)..............20 x 8.0 - 8
Tire Pressure (Front)..............97 kPa (14 psi)
Tire Pressure (Rear)..............69 kPa (10 psi)

Model X165

Size (Front)..............16 x 6.5 - 8
Size (Rear)..............22 x 9.5 - 12
Tire Pressure (Front)..............83 kPa (12 psi)
Tire Pressure (Rear)..............83 kPa (12 psi)

(Tire pressure information is also located on the sidewalls of the tires)

Mower Deck - 107 cm (42 in.)

Blades Rotary..............2
Blade Nut Torque (w/ M12 Nut)..............75 N•m (55 lb-ft)
Blade Nut Torque (w/ 5/8 in. Nut)..............88 N•m (65 lb-ft)
Cutting Height (Approximately)..............25 - 102 mm (1 - 4 in.)
Cutting Width..............1067 mm (42 in.)

Mower Deck - 122 cm (48 in.)

Blades Rotary..............3
Blade Nut Torque (w/ M12 Nut)..............75 N•m (55 lb-ft)
Blade Nut Torque (w/ 5/8 in. Nut)..............88 N•m (65 lb-ft)
Cutting Height (Approximately)..............25 - 102 mm (1 - 4 in.)
Cutting Width..............1219 mm (48 in.)

Fast Idle Engine Speed

X125 Without Mower Deck..............3150 ± 100 r/min
X145 Without Mower Deck..............3250 ± 100 r/min
X165 Without Mower Deck..............3350 ± 100 r/min

Speed of Rotation of Cutting Device

X125 with 42C..............2654 r/min at 3250 r/min engine speed
X145 with 42C..............2788 r/min at 3350 r/min engine speed
X165 with 48C..............3280 r/min at 3450 r/min engine speed

Sound Measurements

Averaged Sound Level at Work Station According to EN836-A2
X125 without Mower Deck..............83.6 dB(A) at 3250 r/min engine speed
X125 with 42C Mower Deck..............86.0 dB(A) at 3250 r/min engine speed
X145 without Mower Deck..............85.0 dB(A) at 3350 r/min engine speed
X145 with 42C Mower Deck..............86.2 dB(A) at 3350 r/min engine speed
X165 without Mower Deck..............82.4 dB(A) at 3450 r/min engine speed
X165 with 48C Mower Deck..............89.6 dB(A) at 3450 r/min engine speed

Vibration Measurements

Hand/Arm Measured Per EN836-A2
X125 with 42C Mower Deck..............Below 2.5 m/s2
X145 with 42C Mower Deck..............Below 2.5 m/s2
X165 with 48C Mower Deck..............Below 2.5 m/s2
Whole Body Measured Per EN836-A2
X125 with 42C Mower Deck..............1.0 ± 0.1 m/s2
X145 with 42C Mower Deck..............0.9 ± 0.1 m/s2
X165 with 48C Mower Deck..............1.2 ± 0.1 m/s2

NOTE: The value listed above represents the weighted root means square acceleration to which the whole body is subjected on a representative machine during actual mowing and transport conditions. The acceleration value depends upon the roughness of the ground, the speed at which the tractor is operating and the operator weight and driving habits. Measurements were obtained through actual field data according to STD Procedure in EN836-A2.