Engaging and Disengaging Mower

NOTE: Put attachment lift lever in transport position to transport machine or when parking machine.

1. Start engine and run at half speed for a couple of minutes to warm up.

2. Lower mower deck to desired cutting height position.

3. NOTE: Throttle lever should be at full throttle position before engaging mower to avoid stalling engine.

   Push throttle lever up to the full throttle position.

4. Pull attachment engagement switch up to engage mower.

5. NOTE: The mower stops as the reverse foot pedal is pressed for hydrostatic transmission with mower engaged.

   Push attachment engagement switch down to disengage mower blades before moving in reverse or stopping engine.