Front Fire Extinguisher Mounting

Center mounting bracket on front side of ladder using dimensions shown.

On machines using position (A), swing ladder to transport position. Locate bottom of extinguisher 6 mm (1/4 in.) above top of feeder house access step and 19 mm (3/4 in.) back from bolts as shown.

Use bracket as template to mark four holes. Drill holes with 5/16 in. bit and secure bracket with truss head bolts (not supplied) with head of bolts toward the fire extinguisher.

Install extinguisher and secure with clamp.

A-9650 STS Combines w/o Duals or Axle Spacers
B-9650 STS Combines w/Duals or Axle Spacers and 9750 STS Combines

AG,OUO1011,1561 -19-03NOV99-1/1