Single Tine Separator (STS) Speed Switch (Black)

NOTE: The separator must be running in order to adjust speed.

The STS speed switch controls the separator rpm. Push and hold (+) symbol to increase speed or push and hold (-) symbol to decrease speed. Check rpm on the tachometer.

This switch also inputs to the tachometer for low separator speed alarm that is displayed in the overhead panel. Whenever separator speed is changed, the low separator speed alarm is also reset.

As system oil temperature increases, separator speed may increase about 30 rpm in four hours. Readjust separator speed as needed.

AG,OUO1035,1360 -19-05JAN00-1/1