Single Tine Separator Covers

CAUTION: Turn off engine, set park brake and remove key.

IMPORTANT: To prevent grain loss make sure separator covers are flush against the separator and underneath the edge of the separator. Covers are installed starting from the left-hand side, as facing the machine and working to the right.

Two covers (A) are used on each side of the machine to seal the threshing section. Three covers (A) on each side seal the separating section. Quick-lock pins (B) and spring straps (C) are used to retain covers.

To remove cover, remove quick-lock pins and raise spring straps. Pull shield out to clear retainer brackets.

A-Covers
B-Quick-Lock Pins
C-Spring Straps

AG,OUO1035,1451 -19-11JAN00-1/1