Changing Feed Accelerator Speed

The combine is shipped with the feed accelerator speed in the 440 rpm position. To change the feed accelerator speed to the 800 rpm position:

  • Remove belt tension by pushing lever (A) up and out from notch in bracket (B).
  • Move belt (C) to outside sheave grooves on both sheaves for 800 rpm.
  • Push lever up and into notch in bracket to reset belt tension.


A-Lever
B-Notch in Bracket
C-Belt

H62145
H62146

AG,OUO1035,1454 -19-11JAN00-1/1