Adjusting Chopper Fins

causym CAUTION: Shut off engine, set park brake and remove key.

Adjust fins (A) to spread material over a wide area but doesn't cover uncut crop.

Loosen nuts (B) and adjust outer ends fins in slots. Tighten nuts.


A-Fins
B-Nuts

H54539
H54629

AG,OUO1035,1483 -19-13JAN00-1/2

If chopper has a poor spread pattern, adjust inside vanes (A) 1/4 distance in slots, inner (third from outside) vanes (B) 1/2 distance in slot and outside vanes (C) to full out position.


A-Center Vanes
B-Inner (Third From Outside) Vanes
C-Outer Vanes

H62194

AG,OUO1035,1483 -19-13JAN00-2/2