IMPORTANT:
Service times are for average conditions. Service more often if combine is used in extreme conditions.
1.
Air Conditioning Drain Hose. Clean air conditioning drain hose (A).
2.
Final Drive Outer Bearings. When operating in mud and water, grease at 10 hours. In normal conditions grease at 100 hours.
|
NOTE:
When operating in mud and water grease rear axle spindle bearings and motor pivots at 10 hours. In normal conditions grease at 50 hours.
3.
Heavy Duty Axle Spindle Bearings (both sides). When operating in mud and water, grease at 10 hours. In normal conditions grease at 50 hours.
4.
Motor Pivots 2-Speed 4-Wheel Drive (both sides). Lube two fittings.
|