Removing Air Cleaner Filters

IMPORTANT: When servicing filters, turn off engine and remove key so dirt cannot be pulled into engine.

Service filters only when engine air filter light stays on.

Unsnap dust cover (A) and remove primary air filter (B). Do not remove safety element (C) unless it is plugged. The safety filter stops dirt that would pass through a damaged primary filter.

Clean, wash or replace the primary filter. Do not clean or wash the safety filter, but install a new one if needed. Do not remove the metal wrap on the filter.

IMPORTANT: Never run the engine without both filters in place.

Check all connections in the air intake system. Be certain they are tight.

IMPORTANT: Do not use any exhaust flow cleaning unit to blow chaff off combine. Using such a unit can cause air filter failure, followed by engine failure.

A-Dust Cover
B-Primary Air Filter
C-Safety Element

AG,OUO1035,1535 -19-24JAN00-1/1