Replacing Variable Speed Feeder House Belt

Run feeder house to close sheaves (A).

CAUTION: Lower variable sheave is under spring tension; if belt is removed, it will snap back to a closed position.

Shut off engine, set park brake and remove key.

Remove both shields.

Loosen nut on idler (B) and remove belt (C).

Install new belt and adjust tension (See "ADJUSTING VARIABLE SPEED FEEDER HOUSE BELT").

A-Sheaves
B-Idler
C-Belt

AG,OUO1035,1540 -19-24JAN00-1/1