Discharge Beater Wing Replacement

causym CAUTION: Shut off engine, set park brake and remove key.

NOTE: Beater wings can be turned over once for additional use.

Beater wings can be replaced without removing beater from combine.

Remove cap screws holding wing and remove wing. Three wings are attached with cap screws and three wings are attached with cap screws, nuts and washers.

Replace wing and tighten nuts or cap screws to specification.

Remove and replace wear strips as required. Tighten bolts to specification.

Specification

Bolts and Cap Screws -Torque 70 N·m (50 lb-ft)

H54675

AG,OUO1035,1551 -19-24JAN00-1/1