Dual Wheels Bolt Torque

IMPORTANT: Wheel bolts must be clean and free of lube before installing. Torque value is for clean, dry bolt. Lubricating reduces friction and overloads the bolts.

1. Each time a dual wheel is removed, torque wheel bolts to specification without using a torque multiplier. Tighten bolts in a criss/cross pattern.

Specification

2. Use a 4 to 1 torque multiplier and turn bolt head 1/4 turn (ratchet or torque wrench will make a full turn). Pull multiplier handle against inside of wheel when tightening.

A-Wheel Bolt
B-Bolt Spacer
C-Socket, 30 mm (3/4 In. Drive)
D-Extension, 3/4 In. x 16 In.
E-4 to 1 Multiplier
F-Extension, 1/2 In. x 10 In.
G-Torque Wrench
H-Outside Dual Wheel

AG,OUO1035,1617 -19-24JAN00-1/1