Specifications - 9650 STS Combines

Engine:
Make John Deere
Model 6081H
Type six-cylinder, in line, valve-in-head, air-to-air aftercooled diesel turbocharged
Rated power at 2200 rpm 216 kW (290 hp)
Power bulge at 2100 rpm 232 kW (310 hp)
Power boost 241 kW (323 hp)
Displacement 8.1L (496 cu. in.)
Bore and stroke 116 x 146 mm (4.56 x 5.06 in.)
Firing order 1-5-3-6-2-4
Air cleaner Dry-type with safety element
Thermostats (two) 82° C (180° F)
Valve Clearance:
Intake 0.46 mm (0.018 in.)
Exhaust 0.71 mm (0.028 in.)
Electrical System:
Type 12 volt, negative ground with 95 amp alternator
Transmission
Speeds three speeds
Brakes:
Type hydraulic shoe
Single Tine Separator:
Separator section diameter 834 mm (33 in.)
Threshing and feed section diameter 750 mm (29-1/2 in.)
Length 3130 mm (123-1/4 in.)
Number of Elements:
Threshing elements 15
Tines 24
Concave:
Area 1.1 sq m (1705 sq in.)
Arc length 1025 mm (40-3/8 in.)
Width 1120 mm (44 in.)
Number of concaves 3
Number of bars per concave Grain-Front 50, Mid/rear 25; Corn 32
Separating:
Area 1.2 sq m (1860 sq in.)
Grate length 1200 mm (47-1/4 in.)
Number of grates 4

 

AG,OUO1035,1649 -19-24JAN00-1/3

Discharge Grate:
Grate length 3746 sq cm (580 sq in.)
Number of grates 3
Discharge Beater:
Diameter 420 mm (16-1/2 in.)
Number of wings 5

 

Feed Accelerator:
Diameter 420 mm (16-1/2 in.)
Number of wings 10
Top Cover Heights:
Feed section 425 mm (16-3/4 in.)
Threshing section 500 mm (19-3/4 in.)
Separator section 550 mm (21-5/8 in.)
Front Chaffer:
Area 0.95 sq m (1473 sq in.)
Chaffer:
Area 1.94 sq m (3007 sq in.)
Sieve:
Area 1.66 sq m (2573 sq in.)
Cleaner:
Total area 4.55 sq m (7053 sq in.)
Grain Tank:
Capacity 8850L (250 bu)
Average unloading rate 4650L/min (132 bu/min)
Weight:
Corn combine-less header 13 080 kg (29 260 lbs)

 

AG,OUO1035,1649 -19-24JAN00-2/3

Capacities:
Fuel tank 808L (210 gals)
Cooling system w/heater 38L (40 U.S. qts)
Engine crankcase w/filter 28.5L (30 U.S. qts)
Transmission 9.6L (10 U.S. qts)
Final Drives:
Single reduction 8.5L (9 U.S. qts)
Feeder house reverser gear case standard 0.9L (2 U.S. pts)
Feeder house reverser high capacity with cooler 3.5L (7.4 pts)
Countershaft drive gear case 1.2L (2-1/2 U.S. pts)
Loading auger gear case 3.8L (4 U.S. qts)
Two-speed separator drive gear case 4.7L (5 U.S. qts)
Engine gear case with transfer 21.3L (22.5 U.S. qts)
Hydraulic/hydrostatic reservoir 34L (36 U.S. qts)

 

AG,OUO1035,1649 -19-24JAN00-3/3