Adjusting Header Drop Rate

NOTE: Lower header to ground to relieve circuit pressure before adjusting header drop rate.

WITHOUT ACTIVE HEADER CONTROL ™ : Loosen nut (A) and turn screw for faster drop rate, turn screw in for slower drop rate.

WITH ACTIVE HEADER CONTROL ™ : Adjust drop rate as described, open accumulator two turns and adjust with knob (B) as needed.

Tighten nut after adjusting.

A-Nut
B-Knob

ACTIVE HEADER CONTROL is a trademark of Deere & Company

AG,OUO1035,1762 -19-16FEB00-1/1