Removing Header from Feeder House

CAUTION: Do not leave drive shafts on combine. Personal injury or machine damage may occur if feeder house is accidentally engaged.

IMPORTANT: Drive shafts with U-joints are used on all approved headers.

NOTE: For complete attaching and detaching procedures refer to the header Operator's Manual.

Disconnect telescoping drive shafts from feeder house at the quick disconnect coupler (A) on left- and right sides.

Place telescoping drive shafts in storage position (B).

A-Quick Disconnect Coupler
B-Storage Position

AG,OUO1035,328 -19-01MAR99-1/1