Transporting Combine on a Trailer

1. Empty grain tank and remove header.

AG,OUO1035,373 -19-02MAR99-1/11


2. To reduce overall height, swing unloading auger back; remove quick-lock pins and corner extensions (A); and fold down grain tank extensions (B) (if equipped).


A-Corner Extensions
B-Grain Tank Extensions

H62115

AG,OUO1035,373 -19-02MAR99-2/11


3. Remove quick-lock pin (A) and sample trough (B).

4. Place grain sample trough in storage position.

5. Release clamps (C) and lower auger.

6. Drive combine on trailer and put multi-function handle in neutral.

7. Stop engine, remove key and set parking brake.


A-Quick-Lock Pin
B-Grain Sample Trough
C-Clamps

H62116
H62943

Storage Position

H62117

AG,OUO1035,373 -19-02MAR99-3/11


8. Fold radio antenna (A) down.


A-Radio Antenna

H54147

AG,OUO1035,373 -19-02MAR99-4/11


9. Tape exhaust pipe cap (A) closed to prevent damage to turbocharger.

10. Lower hand rail (B).


A-Exhaust Pipe Cap
B-Hand Rail

H62118

AG,OUO1035,373 -19-02MAR99-5/11


11. Swing both left-hand and right-hand warning lamps (A) rearward.


A-Warning Lamps

H51697

Left-Hand Warning Lamp

H56063

Right-Hand Warning Lamp

AG,OUO1035,373 -19-02MAR99-6/11


12. Attach arm (A) to unloading auger and bracket with pins (B).


A-Arm
B-Pins

H62119

AG,OUO1035,373 -19-02MAR99-7/11


13. Wire down ladder extension and platform (A).


A-Ladder Extension and Platform

H61818

AG,OUO1035,373 -19-02MAR99-8/11


14. Make sure that pin (A) is installed through locking plate (B) and retained with spring pin at front corner of right-hand gull wing door and door latch (C) is fully engaged.

15. Wire down door at latch (C).


A-Pin
B-Locking Plate
C-Door Latch

H62857
H62858
H62121

AG,OUO1035,373 -19-02MAR99-9/11


16. Make sure pins (A) are installed through locking plates (B) and retained with spring pins at front and rear corners of left-hand gull wing doors and door latch (C) is fully engaged.

17. Wire down door at latches (C).


A-Pins
B-Locking Plate
C-Door Latches

H64205

Left-Hand Front Corner Pin

H62859
H62124

AG,OUO1035,373 -19-02MAR99-10/11


18. Cover up slow moving vehicle emblem (A).

IMPORTANT: Fasten combine to trailer with chains.

19. Fasten combine to trailer with chains.


A-Slow Moving Vehicle Emblem

H63477

AG,OUO1035,373 -19-02MAR99-11/11