|
NOTE:
If you allow more than 15 seconds to elapse between any of the steps, the receiver will automatically revert to time and you must start the procedure over at step 4.
1.
Write down any four-digit number from 0000 to 9999 and keep it in a safe place separate from your machine.
2.
Turn the ignition on.
3.
Turn the receiver off.
4.
Press and hold pushbuttons 1 and 5 at the same time until "---" shows on the display.
5.
Press TUNE/SEEK and "0000" will appear on the display.
6.
Press SEEK as many times as needed to make the last two digits agree with the secret code you have written down.
|
7.
Press TUNE as many times as needed to make the first two digits agree with the code you have written down.
8.
Confirm that the code on the display matches the secret code that you have written down.
9.
Press BAND. The display will show "REPEAT" to let you know that you need to confirm your code.
10.
Repeat steps 5-8 to confirm your code.
11.
Press BAND. The display will show "SECURE" to let you know that your receiver is secure (if THEFTLOCK® has not been activated, "---" will show on the display. To activate, repeat steps 4-11).
|