Cab Ladder Positions

Normal operating field position (A).

Pull down latch and swing ladder to position (B) for combines with a small header, a ladder extension or duals.

From the cab landing, push down on the latch and swing ladder to position (D) before driving on roadways.

CAUTION: Always swing ladder to position (D) before transporting on public roadways in order to reduce combine width and position amber warning lamp toward oncoming motorists.

IMPORTANT: The long ladder extension 1390 mm (55 in) is required on machines equipped with dual tires, axle spacers, etc. will interfere with the platform drive shaft when the ladder is swung to position (D). Raising or lowering the feeder house could damage the ladder, the drive shaft or the drive shaft shield. Place ladder in position (C) in this situation.

A-Field Position
B-Small Header, Ladder Extension or Duals Position
C-Roadway Driving Position for Long Ladder Extension
D-Roadway Driving Position

AG,OUO1011,1558 -19-03NOV99-1/1