|
The integral CD receiver will play your full size CDs.
Playing a Compact Disc
1.
Turn the ignition and receiver on.
2.
Insert a disc partway into the slot (label side up). The player will automatically pull the disc in once it has been partially inserted. The "CD" icon will appear on the display along with the track number and elapsed time, and the disc will begin to play.
3.
If you are listening to the radio, press the CD button to play a CD that has been loaded into the player. If no CD has been loaded, the display will show "NO CD" for five seconds and return to the default display. If a CD has been loaded, the display will show the track number and the elapsed time on the track.
If a CD is ejected and not removed within 25 seconds, the CD will reload.
A CD may be inserted while the receiver is off. To do so, press Eject and insert a CD within 25 seconds.
|
Error Messages
The following error messages may appear while in the CD Player mode:
NO CD - No CD has been loaded in the player.
FOCUS - Lens could not focus on CD. Possible reasons include:
-
Disc is inserted upside down - eject and reinsert CD.
-
Disc is dirty, scratched, or wet - try cleaning CD.
-
Lens is dirty - clean CD lens with a lens cleaner.
-
It is very humid - wait an hour and try again.
TRACKING - Loss of tracking control. Possible reasons include:
-
Disc is dirty or scratched - try cleaning CD.
-
Lens is dirty - clean CD lens with a lens cleaner.
MOTOR ER - Load/unload motor problem - contact dealer.
|