Service During the Break-In Period (First 100 Hours)

Perform service daily or once every 10 operating hours (See this section and "FUEL, LUBRICANTS, COOLANT AND CAPACITIES").

Do not idle the engine unnecessarily.

Check coolant temperature regularly.

Check engine oil and coolant level frequently. Look for signs of leaks.

If it becomes necessary to add engine oil during the break-in period, select an oil of a viscosity corresponding to the seasonal requirements and the information in the "FUEL AND LUBRICANTS section.

Check drive belts and adjust if necessary.

AG,OUO1035,1510 -19-20JAN00-1/1