Header Engage Switch (Yellow)Turns header drive on/off. Push down and push forward to lock switch in the "on" position. Pull back to turn off. To engage header, road transport disconnect switch (A) must be in the field position. This switch must be OFF to start the engine. Header drive can also be shut off with the Quick Stop switch located on top of the multi-function handle. To re-engage the header if header and unloading auger are stopped with the Quick Stop switch, turn header switch off and then back on. Operator must be seated to operate header. If operator leaves seat after engagement, header will continue to operate for five seconds before it disengages. To re-engage, sit in seat then turn switch off and then back on. If the header fails to engage or stops unexpectedly, sit squarely on the seat, turn the switch off, push down and forward on switch to re-engage.
|
|
AG,OUO6075,264 -19-10AUG00-1/1 |